Accessories

Flexible Window Mount for Indoor Devices

The Window Mount is designed to ease the installation of smartBridges Indoor CPE devices; the airBridge airNIC and the airPoint. The Window mount provides a three-way flexibility of mounting the indoor device to suit aesthetic and electrical requirements. The Window Mount is sold as a separate accessory and has its unique part number (sBWMNT 2100). It weighs about 50 gms and can hold devices weighing upto 1 Kg.

Click to view bigger image

Parts Supplied

  • Window Mount Bracket 1 No
  • Fixing Screws 4 Nos
  • Window Mount Screws 2 Nos
  • Wall Plug - 2 Nos
  • Cable Tie 1 No
Click to view bigger image

 

Mounting Instructions

    

  • Attach the airBridge/airNIC/airPoint to the Window Mount bracket using the supplied screws.

  • The device can be attached in three different positions, as per user requirement.
Front Mount    
   Click to view bigger image
Top view

 

Click to view bigger image

Side view

 

Side Mount Left

   
Click to view bigger image      
Top view
Click to view bigger image
Side view

 

Side Mount Right

   
Click to view bigger image      
Top view
Click to view bigger image
Side view

 

  • Install the bracket on the window using the supplied plugs and screws. Alternatively, use 3M VHB tape (double-sided) to hold the bracket to the window. Please allow curing time 24 hours before mounting the device.
  • Use the cable tie to hold the RJ 45 cable to the bracket .


Use this when

  • Avoiding the clutter on a desk

  • Mounting the Indoor device at a common point on the Window for the access of different computers inside the building/ house.





Go Back
 
 
   
Best view 1024x768 resolutions Internet Explorer 5.0+  © 2003 Air Connect Engineering. All rights reserved.